Product Overview

Our electrically operated units are integrated into the floor as unobtrusively as the usual entrance matting. This also applies to foil changing or wheel cleaning units for trolleys which can also operate discreetly and inconspicuously as flush-mounted units. All our products are tailor-made.


SauberlaufzoneSauberlaufzone Radreiniger
  • Entrance Matting System
  • Foil Changing Unit
  • Wheel Cleaning Unit

Electrically operated Entrance Matting System

Verschiedene Beläge zur Auswahl

Electrically operated Entrance Matting System in entrance area

Brush-type V-belts rotating alternately clockwise and anti-clockwise at right angles to direction of walking

Brush-type V-belts rotating alternately clockwise and anti-clockwise at right angles to direction of walking

This Entrance Matting System cleans the soles of people's shoes in the entrance area of buildings with a large amount of foot traffic. Abrasion-proof brush-type V-belts rotate alternately clockwise and anti-clockwise at right angles to the direction of walking and this sideways movement removes dust and dirt very thoroughly from the soles of shoes. In addition the capillary effect of the nylon brushes also removes slush and dirty water. The units are very light and operated by low-noise, maintenance-free, brushless DC drive motors.

Download: dimensions and weights (.pdf, 32 KB)

 
  • Robust drive motor with long maintenance intervals up to 13,000 hrs., DIN EN ISO 9001
  • Quiet, even running/operation
  • Brush-type V-belt toothing, DIN 2215/ISO (6.6 Nylon)
  • Optimum slush/dirt removal by water flushing system (optional)
  • Switch panel (includes recorder for hours operated)
  • On/Off switch - movement-activated

Electrically operated Foil Changing Unit

Adhesive foil removes dirt and dust reliably from the soles of people's shoes

Adhesive foil removes dirt and dust reliably from the soles of people's shoes

Adhesive foil is moved forward automatically and can be changed

Adhesive foil is moved forward automatically and can be changed

This Foil Changing Unit serves as a dust barrier at the entrance to clean-rooms. Dirt and fine dust on the soles of people's shoes stick to the adhesive foil and contamination of clean-room areas is therefore prevented. The unit is available in two versions: stand-alone unit with handrail or built-in unit integrated unobtrusively into the floor just like any floor mat. Once saturation point has been reached, the adhesive foil is moved forward automatically.

 
  • Electronic control unit SPS
  • 24VDC Motor -20°C…+80°C housing temperature
  • Rated current 24VDC, 10Nm
  • Installation depth: width 700mm length 1200mm depth 150mm
  • Indicator light (when foil moved forward or changed)
  • Can be supplied as stand-alone (standard) unit with handrail
  • Unit can be installed in floor cavity

Electrically operated Wheel Cleaning Unit

Wheel cleaned by lateral brushes and rotating round brushes from below

Wheel cleaned by lateral brushes and rotating round brushes from below

Wheel cleaned by lateral brushes and rotating round brushes from below

Wheel cleaned by lateral brushes and rotating round brushes from below

This Wheel Cleaning Unit removes dirt from the wheels of trolleys which were loaded in outside areas. In version one rotating round brushes clean the worst from the wheels; in the second model the residual fine dust is taken up by adhesive foil in front of the clean-room. The Wheel Cleaning Unit can be combined very effectively with the Entrance Matting System.